by Babcock's communication | Dec 26, 2023 | News
At Babcock Valves we learned from our experience that any small detail on any part of a valve is critical to ensure the proper functioning of the whole valve. Here we can see the process of reception and dimensional control of two wedges for a 6″ 2500# Pressure...
by Babcock's communication | Dec 20, 2023 | News
by Babcock's communication | Dec 19, 2023 | News
We showed you in a prior post some actuator driving bushes ready to be internally machined. Just the valve stem and the actuator driving bush machining will define the valve operation time in the ON-OFF valves and the regulation precision level in all flow control...
by Babcock's communication | Dec 12, 2023 | News
Here we have, in our medium-size test bench (a 450 Tons one) a Triple eccentric Butterfly valve being tested. Rating according to ANSI Class 2500#; stainless steel body (ASTM A351 CF10 casting); trim no.12 (316/hard-faced), metal to metal seating, shafts in Stainless...
by Babcock's communication | Dec 5, 2023 | News
Meet these twin valves. After passing through their first stages of life (melt in the foundry, NDE, reception, acceptance, machining), these twin check valve sisters begins one of the most amazing one: the assembly process. In this phase, they will meet all internals,...